Description
TractionMAX – installs in just minutes
- improves vehicles acceleration and traction.
 - waterproof – rugged design
 - plug and play – simple install
 - remote adjustment knobs included dial in your exact throttle and traction settings.
 - enhance low and mid-range horsepower torque and acceleration.
 - reduce turbo lag eliminate stalling on manual gearbox vehicles.
 - can also be stacked with other tuning products to maximize performance.
 - designed and assembled in the U.S.A.
 
each kit contains: TractionMAX device plug and play wiring harness remote adjustment knobs installation kit accessories and installation instructions
automated traction feature – turn on the feature by installing the three pin jumper (included).
- typically this feature would be used by a vehicle with a manual transmission.
 
overview: traction control works once and then it is locked out for 20 seconds.
USAge exandle:
- launch in first gear – TractionMAX controls the rate of acceleration to keep the tires from spinning.
 - TractionMAX lockout for the next 20 seconds &mdash the throttle functions like normal.
 - during lockout gears can be shifted and the throttle responds like normal.
 
note: to enable lockout you must go to wot (wide open throttle).
- after 20 seconds the traction control feature is re-enabled.
 
ON-THE-FLY traction feature – turn on the feature by installing the three pin connector with two wires.
- connect the two blunt wires to a momentary switch or regular switch.
 - feature is activated when the two wires are connected together.
 - typically this feature would be used on a vehicle with an automatic transmission.
 
overview: traction control is disabled when the two wires are connected together.
USAge exandle:
- launch vehicle – TractionMAX controls the rate of acceleration to keep the tires from spinning.
 - push the ON-THE-FLY TractionMAX lockout button when you want the throttle to function like normal.
 
alternative USAge:
- connect the two wires to a toggle switch.
 - turn TractionMAX on/off using the toggle switch
 - automated traction lockout feature – this feature is enabled when the customer plugs in the automated lockout enable jumper (included).
 - ON-THE-FLY traction lockout feature
 - use your own button or switch to enable or disable the traction control feature.
 - wiring to connect your own control button is included or you can upgrade to the optional (sold separately) JMS control button.
 
Instructions: https://support.jmschip.com/content/TractionMAX/TractionMAX_install_JMS.pdf
ARB EO Numbers: https://support.jmschip.com/content/PedalMAX/JMS_EO_list.pdf
Compare PedalMAX – Terrain – TractionMAX: https://support.jmschip.com/content/PedalMAX/PM-PMT-TM_comparison.pdf
Catalog: https://support.jmschip.com/content/JMS_Catalog_Web.pdf






Reviews
There are no reviews yet.